High Conductivity Solid Silicone Rubber RH7022® for Electronic Potting and Electric Parts
Description
Rui - He RH7022® is a kind of solid silicone rubber for extrusion processes, catalyzed by platinum. This silicone rubber is particularly developed for manufacturing all kinds of extruded tubes and profiled bars.
Key Features and Benefits
- Fantastic extrusion performance
- High resistance to yellow
- Excellent stability and flexibility at low temperatures
- Outstanding aging behavior
- Sensational weather resistance
- High stability to ozone and ultraviolet light
- excellent dielectric behavior over a wide range of temperatures
- Easy pigmentable with the LSR Color Pastes
Typical Properties
| RH7022® |
| | Unit | Part - A |
| Appearance | / | translucent |
| Shore A Hardness | A | 68-73 |
| Tensile Strength | MPa·s | ≥ 6.0 |
| Elongation | % | ≥ 220 |
| Tear Strength | KN / m | ≥ 10.0 |
| Linear Shrinkage | % | ≤ 0.5 |
| Plasticity | % | 250-290 |
These figures are for reference only, please contact us for details.
Certificate
Rui-He RH7022® silicone rubber obtained the following test certificate: RoHS, FDA, REACH, PAHS, ISO9001:2016, etc.
Applications
Because of the outstanding properties RH7022® silicone rubber is particularly suitable for electronic tubes, bars, cold shrinkage termination, insulation tube, joint, and breakout.
Packaging & Storage
Available packed in 20kg cartons.
Store in a cool, dry place out of direct sunlight, use it within 12 months from the day of manufacture.
Notice
This product cannot be contacted with compounds containing N, P, S to avoid affecting the catalytic effect of platinum.
FAQ
Q: Why is the tear strength of the silicone mold weak?
A: There are three reasons:
- In order to reduce the viscosity of silicone rubber and pursue a good quality, you may add a lot of silicone oil into the silicon rubber when making molds. In fact, it might have just the opposite effect. The tension and the tear strength will be reduced badly with the addition of silicon oil. And the silicon molds will be in a weak and flimsy manner.
- You may add too much catalyst into the silicone rubber, we suggest customers add catalyst no more than 5%, 2%will be perfect.
- You may use the silicone mold too early after it finished. We suggest the customer begin using the molds after 24 hours. What’s more, it will be better if you can make an outer mold to protect the silicone mold.
If you need to know the prices of our silicone rubbers, please contact us. We do not provide prices on a website because prices fluctuate for many reasons.
Product Tags:
|
|
Solid Electronic Potting Silicone Rubber , Conductive Silicone Rubber Images
|
