FDA Certificate Food Grade Liquid Silicone Rubber for Silicone Baby's Bottles Silicone Sealant
Description
| Style NO. | 6250-30 |
| End use | food mold, nipples |
| Curing type | Platinum vulcanization |
| Shelf life | 12 months |
| Payment term | L/C, T/T, Western Union, Paypal |
Typical Property
| 6250-30 | | / | Unit | Part - A | Part - B | | Appearance | / | translucent | translucent | | Viscosity | mPa.s | 1200000 - 1800000 | | Shore A hardness | A | 30 ± 2 | | Density | g/cm3 | 1.1 ± 0.02 | | Resilience | % | ≥ 45 | | Tensile strength | Mpa | ≥ 7 | | Tear strength | KN / m | ≥ 15 | | Elongation | % | ≥ 650 | | Compression set | % | ≤ 30 | | Linear shrinkage rate | % | ≤ 0.5 | |
This data is a typical reference value and is for reference only.
Production Process
- Add raw material
- Stir and mix
- Sampling inspection
- (Viscosity detection, Hardness test, Tear resistance)
- Mass production
- Label
- Packing
- Transport
Operation way about FDA platinum cure silicone rubber for candy mold/ any mold/cake mold
1. Please clean your original model(mother model) before you begin your mold making operation.
2. Weigh suitable amount of RUI-HE silicone.
3. Mixing the two parts by the ratio of 1:1/10:1 and mix part A and part B evenly in 2-3 minutes.
4. And get the mixture for vacuum-pumping for de-air the bubble in about 2-3 minutes.
5. Fix the mother model onto a clean wooden board.
5. Build a mold frame with four plastic plates or wooden plates, sealing the gap.
6. Release agent should be applied to the products’ surface.
7. Pour the vacuumed mixture into the model frame from the side of the mold frame.
8. When the silicone mixture gets cured, a clear silicone mold will come out!
Packing & Storage
Available in 20kg pails or 200kg drums.
Store in a cool, dry place out of direct sunlight, use it within 12 months from the day of manufacture.
Product Tags:
|
|
Baby's Bottles Food Grade Liquid Silicone Rubber 6250-30 FDA Certificate High Temperature Food Grade Silicone Images
|
